Offering full matrix mixing and a palette of EQ functions to satisfy even the most demanding application, the Ti1048 doesn’t compromise your processing. 24-bit high end converters, coupled with a 96k sample rate ensure a bandwidth in excess of 30kHz and a dynamic range of over 112dB.
XTA’s world class limiters, offering unrivalled transparency (even when being driven hard) give peace of mind when configuring a system to “set and forget”, guaranteeing it will always sounds its best and be safe. Set-up of timed preset recalls, along with full real time monitoring and control offer complete peace of mind. Then just unplug the USB and you’re good to go!
A brand new software package, iCore, has been developed to work alongside all Ti Series components (amplifiers, breakout boxes, processors) and provides a centralised point for all control and monitoring. Via either the front USB or an RS485 link, the Ti1048 is entirely configured under iCore.”
Features:
Gain Ranges:
+6dB to -40dB in 0.1dB steps (Input); +15db to -40dB in 0.1dB steps (Output)
+6dB to -40dB in 0.1dB steps plus mute (Matrix)
Parametric Filter Suite: 8 bands per input, 9 Bands per output
Filter Gain: +15dB to -30dB in 0.1dB steps
Freq. Range: 19.7Hz – 32kHz in 1/36 octave steps
Filter ‘Q’/Bandwidth: 0.4 to 128 / 2.5 to 0.008
Switched to shelving response LF: 19.2|Hz to 1kHz; HF: 1kHz to 32kHz
Additional filter types: High/Low Variable “Q” (resonant), High/Low Pass Elliptical, Band Pass, Notch, Phase, All Pass, High/Low Shelving
Crossover Filters: High Pass: 10Hz to 16kHz, Low Pass: 35Hz to 22kHz, in 1/36 octave steps
Responses: 1st order 6dB/oct; Bessel/Butterworth/Linkwitx-Riley 12-24dB/oct.
Bessel/Butterworth 18dB/oct.
Maximum Delay Setting: 650mS (Input to Output), Minimum step size 0.3uS
Program Limiter: Threshold +22dBu to -10dBu; Attack Time 0.3mSto 90mS; Release Time 2/4/8/16/32x Atk*
“D-Max” Clip Limiter: Attack Time -60uS; Release Time Slow/Medium/Fast*
Real Time Clock and Calendar: Updated automatically when synced with PC
User Memories and Timers: Up to 20 user memories; Up to 10 Timer Recalls
GPI Recalls: Simple (one recall per input); Complex (up to 16 recalls – binary encoded); Wall Panel Mode**
*Limiter attack and release times can be set to automatically track the high pass filter on each output channel (recommended).
**For use with MC2 preset recall wall panel only
![Ti-Series Processing [Breakout boxes – discontinued]](https://www.mc2-audio.co.uk/wp-content/uploads/ti048-front-panel.jpg)
![Ti-Series Processing [Breakout boxes – discontinued]](https://www.mc2-audio.co.uk/wp-content/uploads/ti1048-rear-panel.jpg)
![Ti-Series Processing [Breakout boxes – discontinued]](https://www.mc2-audio.co.uk/wp-content/uploads/tibob-front-panel.jpg)
![Ti-Series Processing [Breakout boxes – discontinued]](https://www.mc2-audio.co.uk/wp-content/uploads/tibob-rear-panels.jpg)
